pry-cam energy harvester

TECH SPECS

• SENSOR

  Type
  Electromagnetic, based on a patented Ultra Wide Band antenna, also providing AC synch signal

  Bandwidth
  75MHz

  PD sensitivity
  Down to 1pC

  Synch sensitivity
  Down to about 150 VAC (at 10 cm)

  Synch frequency
  From 10 Hz to 1 kHz

  Working range
  From 1 cm up to 200 cm (depending on the PD activity level)

  Power supply
  3.3 V, 40 mA (from acquisition system)

  Weight
  About 80g (depending on the configuration)

  Dimensions
  70 mm x 70 mm x 70 mm LxWxH (integrated with the acquisition system)

• ACQUISITION UNIT

  Sampling frequency
  200 MS/s

  Resolution
  8 bit

  Bandwidth
  100 MHz

  Gain
  From 0 dB to 40 dB

  Trigger
  Digital, fully configurable

  Synch resolution
  16 bit (5.6 μs)

  PD channel
  50 Ohm, 1.5 Vpp (overvoltage protected)

  Synch channel
  1 Mohm, 5 V (overvoltage protected, optional)

  Processing
  Real-time filtering capabilities, ultra-precise time stamping (°10 ns)

• Repetition rate - full pulse waveform
  Ethernet 10,000 pps, WiFi 3,000-6,000 pps

  Repetition rate - only pattern
  Ethernet 50,000 pps, WiFi 10,000 pps

  Interfaces
  Optical Fiber Ethernet (100-Base FX), Wireless 802.11b/g (WiFi)

  Remote synch
  Wireless RF interface @ 868MHz (optional)

  Working mode
  Local, remote and monitoring

  Power supply
  12 V, 200 mA

  Backup battery
  Li-Po 7.4 V, 2200 mAh

  Autonomy in battery mode
  Approx. 6 hours

  Weight
  About 400g (depending on options)

  Working Temperature
  From -25°C to 70°C

  Dimensions
  160 mm x 120 mm x 130 mm LxWxH

  Case
  Rugged ABS plastic with IP67 protection rating