Pry-Cam family overview
Discover more on cutting-edge products for condition-assessment and asset management
MORE
- Instruments
- Accessories
Discover more on cutting-edge products for condition-assessment and asset management
MORE
Pry-Cam Grids is a high-performance acquisition system for automatic acquisition, processing and classification of PD signals and spot temperature.
It is designed for remote monitoring of 3-phase strategic assets and can then be installed during normal operation.
200 mega samples / second
50 MHz bandwidth
PD pattern, with waveform and frequency spectrum of every PD pulse
AC synchronization with supply voltage
on hv and
mv components
Type
Electromagnetic, based on a patented Ultra Wide Band
technology, also providing AC synch signal
Bandwidth
0.1 - 50 MHz (Grids) / 25 MHz
PD sensitivity
Down to 1 pC
Synch sensitivity
Down to about 150 VAC (at 10 cm)
Synch frequency
From 10 Hz to 1 KHz
Working range
From contact up to 10 cm (depending on the PD activity level)
Power supply
3.3 - 5V DC, 7.5 mA (from acquisition system)
Weight
About 50 gr (depending on the configuration)
Dimensions
160 x 90 x 8 (LxWxH), flat and flexible tipe
Sampling frequency
200 MS/s
Bandwidth
50 MHz (Grids)
Gain
From 0 dB to 40 dB
Trigger
Digital, configurable
Synch resolution
16 bit (5 μs)
Processing
Real-time filtering, ultra-precise timestamp (5 ns)
Repetition rate - full pulse waveform
Ethernet > 10,000 pps, WiFi > 3,000-6,000 pps
Repetition rate - only pattern
Ethernet > 50,000 pps, WiFi > 10,000 pps
Input - PD channels
3x100 Ohm diff., 1.5Vpp (overvoltage protected)
Input - Synch channels
3x1 MOhm, 5V + 1 x line (overvoltage protected)
Processor
Based on ARM™ architecture
Interfaces
Ethernet or Wireless 802.11b/g (via USB adapter)
Modem
GSM/UMTS modem (optional)
Local Storage
Solid State Technology, up to 64GB
Working modes
Live, remote on demand or continuous monitoring
Power supply
110-230V, 50-60Hz AC / 12V DC
Power consuption
< 5W
Weight
About 2.5 kg (depending on options)
Working temperature
From -25°C to 90°C
Dimensions
250 x 210 x 100 mm (LxWxH)
Case
Aluminium with IP67 protection rating
Mounting
Flange/srew, orientation horizontal/vertical
You measure, you test, you control.
Your Pry-Cam Grids monitoring system can either be operated with the Pry-Cam Cloud or a local server. Pry-Cam Clould allow to perform automatic diagnosis based the exclusive Pry-Cam Brain algorithm based on machine learning over more than 20,000 PD measurements. The local server is the solution for a stand alone monitoring system with physical connection with your SCADA
Remote monitoring
and control
Remote advanced
processing
Data storage
and protection
Advanced and reliable alarms, while easy to install and to use: the ultimate solution to monitor your strategic assets
