Pry-Cam family overview
Discover more on cutting-edge products for condition-assessment and asset management
MORE
- Instruments
- Accessories
Discover more on cutting-edge products for condition-assessment and asset management
MORE
Pry-Cam is a portable instrument for automatic acquisition, processing and classification of PD signals.
It acquires the electro-magnetic field produced by every single PD pulse without service interruption.
200 mega samples / second
100 MHz bandwidth
PD pattern, with waveform and frequency spectrum of every PD pulse
AC synchronization with supply voltage
on hv and
mv components
Type
Electromagnetic, based on a patented Ultra Wide Band
antenna, also providing AC synch signal
Bandwidth
100 MHz with filter for FM band
PD sensitivity
Down to 1pC
Synch sensitivity
Down to about 150 VAC (at 10 cm)
Synch frequency
From 10 Hz to 1 kHz
Working range
From 1 cm up to 200 cm (depending on the PD activity level)
Power supply
3.3 V, 40 mA [internal]
Weight
About 80g [internal]
Dimensions
70 mm x 70 mm x 70 mm LxWxH
[internal]
Sampling frequency
200 MS/s
Resolution
8 bit
Bandwidth
100 MHz
Gain
From 0 dB to 40 dB
Trigger
Digital, fully configurable
Synch resolution
16 bit (5.6 μs)
PD channel
50 Ohm, 1.5 Vpp (overvoltage protected) [internal]
Synch channel
1 Mohm, 5 V (overvoltage protected, optional) [internal]
Processing
Real-time filtering capabilities, ultra-precise time stamping
(°5 ns resolution)
Repetition rate - full pulse waveform
10,000 pps (about 8000 pps over WiFi)
Repetition rate - only pattern
up to 50,000 pps
Interfaces
WiFi 802.11b/g, data rate > 54Mbps
Remote synch
Wireless RF interface @ 868MHz (optional)
Working mode
Local, remote and monitoring
Power supply
12 V, 200 mA
Backup battery
Li-Po 7.4 V, 2200 mAh
Autonomy in battery mode
Approx. 6 hours
Weight
About 400g (depending on options)
Working Temperature
From -25°C to 70°C
Dimensions
160 mm x 120 mm x 130 mm LxWxH
Case
Rugged ABS plastic with IP67 protection rating
Pry-Cam Portable works with your iPad with the Pry-Cam App available on App Store. It can be operated in three different operating modes to allow you the maximum flexibility.
The three different operating modes allow you to get more and more information required to fit with your expectations and PD expertise level. Temporarily moving from Basic to Advanced to Premium modes allow to satisfy any needs with one single instrument.
3 operating modes. Find the right one for you
| Recommended for MV | Recommended for HV | ||
BasicFree use |
Pry-Cam Portable is used as a reliable PD surveyor with trafic light and simplified PD pattern |
|
|
AdvancedPay-per-use |
Pry-Cam Portable provides you the PD Pattern only for simple diagnosis |
|
|
PremiumPay-per-use |
Pry-Cam Portable provides you the complete PD Patterns with waveforms and frequency spectrum for any single PD pulse |
|
|
Possibility to temporarly upgrade it
to advance or premium modes for detailed diagnosis
Advanced and Premium modes
the way to have an advanced PD instrument for detailed diagnosis only for the few minutes you need
Virtual access to Prysmian PD Experts
with remote diagnosis within 24-hours
Whenever you want, every single PD measurement can be saved together with many useful details, such as pictures, recording messages, GPS coordinates, notes and tags.
You measure, you test, you control.
Every single PD measurement, together with pictures, videos, recording messages, GPS coordinates you wish to add during your PD testing, are safely stored and protected on Pry-Cam Cloud. By accessing into your member area you can remotely check, analyze and upgrade your own PD measurements and get advanced insights, such as data statistics.
Remote monitoring
and control
Remote advanced
processing
Data storage
and protection
«Real progress happens only when advantages of a new technology become available to everybody.» - Henry Ford
Experience the change by using your own Pry-Cam Portable. You will make the progress happening on your asset management strategy.
